Vacuum Oven
Vacuum Oven
Introduction
2.1 Materials of construction:
Inner Chamber and Outer Chamber and Door etc. are made Up of Stainless Steel
SS-304 OR SS-316 (On Request)
2.2 Temperature Controller:
Digitally Controlled, Advance Microprocessor based PID Controller and PT-100 RTD Sensor.
2.3 Adjustable Over Temperature Limit Control:
The Adjustable over Temperature Limit Control is completely independent of the Main Temperature Controller and guards against malfunctions which would allow temperature to rise past the Temperature Set Point. Setting adjustments for this control has been provided with the help of a knob.
2.5 Miniature Circuit Breaker (MCB) for Electrical Overload Protection and Voltage Supply ON/OFF.
2.6 Rotary Switch for selection of Low, Medium, High Heating of the chamber , Depending upon the required set temperature.
2.7 Settable alarm alert on reaching set point temperature or desired temperature For alarm alert.
Toughened glass window provided in the front door to view the inner chamber.
Vacuum Oven with double walled construction, Inner Chamber , Outer Body, Doors , all
are made up of Stainless Steel SS-304 OR SS-316 ( On Request).
Microprocessor based PID Temperature Controller with independent Safety Feature of adjustable over Temperature Limit Control has been provided.
SS-316, Mechanical Dial type Vacuum Gauge. ( Digital Vacuum Gauge Indication quoted optionally)
Suitable Vacuum Pump to be provided by the customer ( Not in our Scope of Supply).
The unit is provided with a main MCB and suitable wirings and terminals.
Technical Data
| SN | PARTICULAR | ANALOG SERIES | |||
|---|---|---|---|---|---|
| Model | VTD-027A | VTD-050A | VTD-095A | VTD-125A | |
| 1 | Vacuum Gauge | Analog (Mechanical Dial Type) | |||
| 2 | Vacuum Range | 0 to -29 inHg OR 0 to -730 mmHg | |||
| 3 | Vacuum Resolution | 0.5 inHg OR 10 mm Hg | |||
| 4 | Inner Chamber Dimensions (WxDxH) mm approx | 305x305x305 (12″x12″x12″) | 380x380x380 (15″x15″x15″) | 460x460x460 (18″x18″x18″) | 460x610x460 (18″x24″x18″) |
| 5 | Inner Chamber Capacity (L) | 27 | 50 | 95 | 125 |
| 6 | Overall Dimensions (WxDxH) mm approx without leg | 505 x 485 x 705 (20″x19″x28″) | 580 x 560 x 780 (23″x22″x31″) | 660 x 640 x 860 (26″x25″x34″) | 660 x 790 x 860 (26″x31″x34″) |
| 7 | Material of Construction (Inner And Outer Chambers) | SS-316 (Stainless Steel) | |||
| 8 | NO. Of Shelves | 3 Nos. Anodized Aluminum for better Heat Transfer (MOC SS-316 on request) | |||
| 9 | Heating Systems | Wall Electrlc Heater | |||
| 10 | Temperature Controller | PID Type | |||
| 11 | Temperature Range | Ambient +10° to 180 ° C | |||
| 12 | Temperature Resolution | 0.1 ° C | |||
| 13 | Input Supply Voltage | 230V , 1 Phase, 50 Hz | |||
| 15 | Safety | Adjustable Over Temperature Limit by Thermostat , Independent of Main PID Controller | |||
| SN | PARTICULAR | DIGITAL SERIES | |||
|---|---|---|---|---|---|
| Model | VTD-027D | VTD-050D | VTD-095D | VTD-125D | |
| 1 | Vacuum Gauge | Digital | |||
| 2 | Vacuum Range | 10-1010 mBar | |||
| 3 | Vacuum Resolution | 1 mBar | |||
| 4 | Inner Chamber Dimensions (WxDxH) mm approx | 305x305x305 (12″x12″x12″) | 380x380x380 (15″x15″x15″) | 460x460x460 (18″x18″x18″) | 460x610x460 (18″x24″x18″) |
| 5 | Inner Chamber Capacity (L) | 27 | 50 | 95 | 125 |
| 6 | Overall Dimensions (WxDxH) mm approx without leg | 505 x 485 x 705 (20″x19″x28″) | 580 x 560 x 780 (23″x22″x31″) | 660 x 640 x 860 (26″x25″x34″) | 660 x 790 x 860 (26″x31″x34″) |
| 7 | Material of Construction (Inner And Outer Chambers) | SS-316 (Stainless Steel) | |||
| 8 | NO. Of Shelves | 3 Nos. Anodized Aluminum for better Heat Transfer (MOC SS-316 on request) | |||
| 9 | Heating Systems | Wall Electrlc Heater | |||
| 10 | Temperature Controller | PID Type | |||
| 11 | Temperature Range | Ambient +10° to 180 ° C | |||
| 12 | Temperature Resolution | 0.1 ° C | |||
| 13 | Input Supply Voltage | 230V , 1 Phase, 50 Hz | |||
| 15 | Safety | Adjustable Over Temperature Limit by Thermostat , Independent of Main PID Controller | |||
